![]() See if there are any connections that have come loose. Once the power is completely shut off, open up the fan housing and take a look inside. Make sure before you do any work to the internal wiring of the fan, that you shut off power to the fan from the circuit breaker (not just the light switch). You’ll need to open up the fan housing and check the electrical connections. The same goes if there is power and the fan still won’t turn at all. If there is no power coming to the fan lights and there seems to be no power at all, there could be an electrical short within the fan housing. If the fan looks like it’s trying to turn and there’s a bad groaning sound, or smoke, turn the fan off immediately. ![]() Try putting it in forward and reverse to see if either mode works. Make sure the switch isn’t in between positions. ![]() If the fan won’t turn on and the lights are working, then there is no power to the fan. they need to be set the same way on both the fan and the remote. This can usually be done by checking the dip switches. If the remote is sending a signal, check to see if the fan and the remote are set to the same frequencies. Is there a light that normally turns on when you are using the remote to send a signal? Is the light still turning on or not doing anything at all? If the light is not coming on then the remote is not sending a signal.Īlso Check: How to use Harbor Breeze ceiling fan remote? If replacing the batteries does not work, check the remote. Replace them, even if you replaced them already recently. The batteries are the most common place to start.
0 Comments
Leave a Reply. |